Top 4 Causes of Air Conditioner Problems in Lexington, SC
info • May 11, 2021
If you’ve ever spent a hot summer in the greater Lexington, SC area in a home or business plagued with air conditioner problems, it’s certainly an experience you don’t ever want to repeat. Don’t leave your spring and summer comfort to chance this year! Keep reading below to learn about the most common causes of air conditioner problems so you can be proactive and help prevent future AC repair issues.
Leaking Ducts
The ductwork that runs through the walls and ceilings of your Lexington, SC home carries the cooled air from the air conditioner throughout your space. If there are holes or leaks in your ductwork, all of that expensive cool air your AC unit provides can wind up in your walls or areas of your home where it’s not doing anyone any good. This not only decreases your home comfort, it also increases the energy your AC unit uses in order to compensate for this escaped air.
Fan Problems
There is a fan that blows indoor air over your AC units evaporator coil to cool the air and another that blows air over the outdoor unit’s condenser. If either of those fans are malfunctioning, you end up with poor airflow throughout your Lexington, SC home and air conditioner problems. If you neglect fan problems, it can lead to even bigger air conditioner problems so it’s best to stay on top of them and have it repaired ASAP.
Low Refrigerant
Refrigerant is the stuff that your air conditioner uses to remove the heat and humidity form the air in your home. If your AC unit develops refrigerant leaks, you can end up with not enough refrigerant left over to effectively cool the air in your Lexington, SC home. Refrigerant leaks can be a time-consuming and expensive process so be sure to call your local HVAC contractor as soon as you think you might have one.
Faulty Thermostat
Finally, if your thermostat is not working properly your air conditioner cannot accurately cool down your Lexington, SC home. Even if you have the most efficient and effective AC unit, a faulty thermostat can cause you and your family great discomfort. If you’re interested in learning more about some of the thermostats we carry and install here at Brian’s Heating & Cooling, check out our products page https://www.briansheatingandcooling.com/thermostats
or give our team a call today!
As those crisp mornings roll into Lexington and the high temps of summer begin to fade, many homeowners breathe easier — but your heating, ventilation, and air-conditioning (HVAC) system is actually entering a phase where it matters even more. Rather than simply switching from “cooling mode” to “heating mode,” this is the time when smart performance, indoor air quality, and system efficiency all become key to comfort (and cost). Here are four important areas where your HVAC system can make a real difference this season — and how Brian’s Heating & Cooling can help make them work for your home. 1. Fine-Tune Temperature Control for Transitional Days Here in the Lexington area, fall can bring unpredictable swings — warm afternoons, cooler evenings, sudden changes. A system that’s designed only for “full blast heat” may struggle with these transitions, leaving parts of your home too warm, too cool, or switching on and off inefficiently. Setting your thermostat in “auto” fan mode instead of “on” means it runs only when needed rather than continuously circulating air. A smart or programmable thermostat can adjust for the changing patterns, ensuring your system isn’t overworking during mild weather. Regular check-ups to ensure sensors, controls and vents are balanced help avoid hot or cool zones and keep your comfort steady. 2. Balance Humidity and Air Quality as the Season Changes Just because the days are cooler doesn’t mean indoor humidity and air-quality issues vanish. With windows being closed more often, fewer “fresh air” exchanges, and your system shifting modes, the indoor environment needs attention. Your HVAC system should be removing excess moisture (which can lead to mold or musty smells) and helping retain comfortable humidity levels. Upgrading air filters and checking ductwork for leaks helps reduce dust, allergens and stale air that can build up when the house is sealed tight. At Brian’s Heating & Cooling, we can evaluate your indoor-air setup (ventilation, filtration, duct sealing) and recommend targeted improvements that match Lexington’s climate. 3. Efficiency Gains Don’t End with Summer It’s tempting to think the big energy usage is over once the peak summer heat fades, but the truth is: transitional seasons offer some of the best opportunities for efficiency gains — if you catch them. A system in good shape will handle moderate conditions with less energy than one struggling from summer wear. Cleaning coils, checking refrigerant levels (even if you’re not actively cooling), verifying duct integrity — these all help your system settle into the cooler period without carrying unnecessary stress. A more efficient system means lower bills, less wear and longer lifespan for your equipment. 4. Maintain Comfort Without the “Blasting Heat” Mentality The cooler weather gives you the chance to focus on long-term comfort and system health instead of emergency fixes. It’s easier and more cost-effective to optimize now than wait until the first cold snap or the next heavy duty cooling cycle. Address small issues now (noises, uneven temps, unexpected fan run) before they escalate. Consider zoning or adjust airflow if some rooms are always colder/warmer — as the outdoor temps moderate, these imbalances become more noticeable. A maintenance check now is not only about “making sure it works,” but about “making sure it works smart.” Why Brian’s Heating & Cooling Is The Local Choice For This Season Local expertise: Serving Lexington, SC since 2005, Brian’s knows how our weather, homes and HVAC systems interact in the Midlands. briansheatingandcooling.com+1 Full-service care: From installation, repair, to preventive maintenance, they’re equipped to optimize every aspect of your HVAC setup — not just “turn on the heat.” Focus on comfort & efficiency: Their approach goes beyond switching modes — it’s about making your system work well for your home in every season. Ready to Make Your Home More Comfortable (and Efficient)? Don’t wait for the first chilly night to realize your system isn’t operating at its best. Contact Brian’s Heating & Cooling at 803-796-1788 or visit our website to schedule a check-in or upgrade discussion . Let them help you move into cooler weather with confidence in your home’s comfort and system performance.
Many homeowners think of HVAC systems as just a way to heat or cool a home. But your HVAC system plays a huge role in indoor air quality, affecting your health, comfort, and even energy bills. At Brian’s Heating & Cooling, we want Lexington residents to understand how simple maintenance and upgrades can make a big difference indoors. Here are five surprising ways your HVAC system affects the air you breathe. 1. Filters Do More Than Trap Dust While everyone knows filters catch dust, they also help reduce pollen, mold spores, and pet dander. Choosing the right filter and replacing it regularly can dramatically improve indoor air quality. 2. Ductwork Can Harbor Allergens Leaks or buildup in ductwork can circulate dust, allergens, and even bacteria throughout your home. Regular inspections and cleaning keep your air cleaner and your system running efficiently. 3. Humidity Levels Affect Health Your HVAC system influences indoor humidity. Too much humidity can encourage mold growth, while too little can dry out skin and sinuses. Proper system settings and accessories like humidifiers or dehumidifiers can maintain a healthy balance. 4. Vent Placement Matters Furniture, curtains, or blocked vents can reduce airflow and cause stagnant areas where dust and allergens accumulate. A properly designed and maintained system ensures even airflow, which keeps air fresher throughout your home. 5. Smart HVAC Upgrades Make a Difference Upgrading to higher-efficiency filters, air purifiers, or even a smart thermostat can enhance your indoor air quality. Modern HVAC technology monitors air quality and adjusts airflow to optimize comfort and health. Check out some of the smart thermostats we carry and install today! Your HVAC system is more than just heating and cooling—it’s a key part of your home’s air quality. For residents in Lexington, SC, understanding these factors and taking proactive steps can create a healthier, more comfortable living space. If you want Brian’s Heating & Cooling to inspect your system or recommend air quality improvements, call us at 803‑796‑1788 or schedule a service online today.
As August winds down in Lexington, SC, and the oppressive summer heat finally begins to ease, it’s easy to breathe a sigh of relief. But for your HVAC system, now is a prime time—not to rest, but to get ahead. Late summer tune-ups can help reset your system, head off lingering stress from the hottest months, and prepare you for the seasonal transitions ahead. At Brian’s Heating & Cooling, we recommend taking advantage of this breather to optimize performance, prevent breakdowns, and safeguard your comfort and energy savings well into the fall. Why an August Tune-Up Makes Sense 1. Beat the Fall Rush Once the cool air hits in mid-September, homeowners begin scheduling maintenance en masse. Booking now means you’ll avoid long waits and get prompt service from our team when you need it most. 2. Repair Summer Wear & Tear From hefty runtime to clogged filters and stressed-out components, summer can wear your system down—even if it’s still running. A late-summer inspection helps us catch minor issues—like loose belts, dirty coils, or failing capacitors—before they lead to costly repairs in the fall. 3. Improve Transition Performance As we shift toward milder days, your system must alternate between cooling and occasional dehumidifying or fan-only modes. A pre-transition tune-up ensures smooth switching, preventing odd noises, short cycling, or inefficiencies. 4. Lock in Efficiency & Lower Bills Optimized systems run more efficiently. We’ll clean coils, check refrigerant, lubricate moving parts, and calibrate airflow—actions that cut strain and energy usage as you move into the next season. 5. Extend Lifespan & Protect Investment Routine care now pays off in system longevity. Taking care of wear and tear reduces stress on major components, helping your AC—and the rest of your HVAC—last longer and stay reliable into the cooler months. What a Late-Summer Tune-Up Includes Safety & Performance Inspection – Identify wear, electrical risks, or airflow issues before they worsen. Deep Cleaning (Coils, Filters, Drain Lines) – Restores airflow, reduces microbial buildup, and prevents system blockages. Refrigerant & System Pressure Check – Ensures optimal cooling power and prevents freezing or inefficiency. Calibration of Thermostat & Controls – Ensures seamless transitions between modes and accurate temperature control. Lubrication & Component Tightening – Keeps moving parts running smoothly and safely. Operational Test Run in Cooling & Fan Modes – Confirms proper functionality before seasonal changes hit. Ready for a Cooler, Smarter Fall? August may still feel sweltering—but it’s the perfect window to give your system the attention it deserves. Contact Brian’s Heating & Cooling today to schedule your late-summer HVAC tune-up in Lexington, SC. We'll make sure your system transitions into fall smoothly, efficiently, and reliably—so you’re never caught off guard when the seasons change. Check out our maintenance service page to learn more about how we can keep your heating and air conditioning equipment running effectively and efficiently all year long.